Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
S-2.1, r. 13 - Regulation respecting occupational health and safety
Section 226
Disposition versions
226. (Replaced).
O.C. 885-2001, s. 226; 1112-2023O.C. 1112-2023, s. 31.
226. Safety precautions: A friction clutch press shall:
(1) have clutch-braking control devices that automatically stop the press by activating the clutch and brakes; this clutch action shall remain inoperative until activated;
(2) be equipped with lockable control devices for switching off-circuit and for single or automatic step advancing;
(3) require the use of a two-hand control device in step-by-step advancing mode, except if the danger zone is not accessible or is protected by a protector or protective device;
(4) never be used for production in step-by-step advance mode;
(5) be equipped with double or twin load breakers when the clutch is air-powered; any failure of a load breaker shall prevent the press from operating.
